Antenna power supply ESPE 12V 300mA 3.6W jack 3.5 mm | ESPE-0312-W2E-JACK3,5L

SPECIFICATION:

• input parameters:
• Rated input voltage range 100-240 VAC
• permissible input voltage range 90-264 VAC
• Supply voltage frequency range: 47-63 Hz
• No-load power consumption: less than 0.1 W
• output parameters:
• Rated output voltage: 12 V
• Rated output power: 3.6 watts
• Rated load current: 0,3 A
• Energy conversion efficiency:  over 75%
• additional information:
• operating temperature range: 0ºC to +40ºC
• output protection:  overcurrent protection (OCP), short circuit protection (SCP), overvoltage protection (OVP)
• input protection: overvoltage (OVP), undervoltage (UVP)
• MTBF: 30 thousand h 
• LED indicator
• dimensions: 75x48x68 mm
• output cable length: 1.5 m with a cross section of 0.2 mm2
• weight: 61g

1. A power supply used to feed antenna amplifiers through a power separator.
2. This type of circuit is used when the amplifier (amplifier system) needs to be supplied with 12 V and up to 300 mA.
3. A system with an isolator is also used in cases where the distribution of the RTV signal is carried out on splitters that do not pass DC voltage, and it is required to feed the amplifier located on the mast or in the antenna box.